When making this decision, it is very important to decide what you want to store in each part of the barrel. We taped several pieces of card onto the barrel (see picture), so that we knew there would be enough space above and below the doors for them to close without much drama. Barrel sink – Get a wooden barrel from a bodega or whiskey distillery. Tap the hoop down with the hammer and wood, so that the hoop is sitting between the two layers of cellotape/gladwrap.
That way you can make sure it is 100% personalized for you!
but too much good whisky is barely enough." I think I am a whiskey finish kind of girl, but I do like the natural finish too— it makes the bands stand out. Then use your template to mark up and cut out the shelf.
The whiskey barrel sink above doesn’t have a handle since the owners opted to use the bung hole to pull open the cabinet door. To make a template for the shelf. Copper sink. Although putting the sinks in your master bath, outdoor kitchen, garden, or restaurant/bar restrooms could be awesome as well. You have so many options! Buy Now, This vanity is GORGEOUS! Drill holes into the barrel for the screws, and then screw the hinge onto the barrel.
As you put the cabinet door together, consistently check the curvature and be sure it’s matching with your barrel’s opening. The carrera marble sink is beautiful, and I love the barrel and the fact that they included a door for storage. Secure the sink with nails and silicon sealer. What we did was get an old piece of oak, and cut three slightly curved pieces out. The DIYers had not yet stained the edges.
- Mark Twain. You’ll need to mark out where you’ll put the double doors with sticky tape and then use your hacksaw to cut right through the wood to the inside of the barrel.
The barrel was pierced by a cap, in case the cork is still in place. Cut out a small indentation in both of the doors and the barrel so the door sits flush against the barrel when it’s closed. Under the Liquor Licensing Act 1990 it is an offence: for liquor to be delivered to a person under the age of 18 years. Let me know in the comments below if you have one of these and how it is going for you – I am sure we’ll all have a case of barrel envy! I have tons of these things! And he did once tell me I don’t have a lot of clothes for a girl so he can’t be too upset. But they do not have much nostalgic charm. Give yourself the afternoon to work on it — maybe three to four hours. From log cabins to cracker homes, a barrel sink base is the way to go. I thought it would look great as a cabinet (and could act as my Christmas present this year from my parents), so I called Dad up and he agreed that it would be a good idea and a fun project over Christmas. If you’re like me and have to create a honey do list and wait a year to get a faucet swapped out, you may just want to go with this one that’s already done. Measure in about ⅞” – ½” so that you allow for a lip that will let you secure the sink to the barrel.
And how cool that the sink is copper- I would love to change the pedestal sink in my powder room with this and have a little character with storage to boot!
Select a 3/4 “hose or a straight PVC deep coupling socket, to which you can attach a 1-inch-by-3/4-inch threaded adapter to accept a hose coupling. If you liked what you read and saw, please take a second to rate this Instructable.Happy New Years everyone!Malcolm Gill ← Older Post
Drill some holes and screw in the brackets. We coat them with exterior varnish. Who do you choose to be? These vanities are made from Grade A barrels.
This is also the point where you decide which part of the barrel you want the door cut out of.
for a person under the age of 18 years to purchase liquor. You could also cut it so that the bung hole is on the door, and use it as a sort of handle to open and close the door. We also drilled holes in the shelf to screw it onto the supports to make it as secure as possible. From there all you need is a drill, some plumbing expertise, and a sink basin and you’re set.
We used two different sanders, a circular one, which did most of the work, and then a smaller triangular shaped one to do the finer edges.Sandpaper I think these 150 lb beast are to often overlooked for creative uses such as yours.
Remove the cellotape and gladwrap and sand down the wood around the hoops to get rid of any excess glue.
It’s time to make a statement with this one-of-a-kind creation! Step 9: Workout the plumbing mechanics. This isn't absolutely necessary but it made it easier to get the shelf the right shape and size.Plywood Seriously, how cool would it be to have this be your bar room sink instead of one of those generic sinks without character? We started cutting with the hacksaw, until we'd cut right through the wood into the inside of the barrel.
Also, if I did not include your name as source please also put a comment in the post with your info so I can update the photos. xxo Mikky.
…
on Step 9, Brilliant.
I LOVE this sink! Gladwrap
Looks to be the same manufacturer (different seller). If you are the owner and wish to have any of your gorgeous photos removed please put a comment in the post and I will remove them immediately. There was a large area to sand, so a lot of sawdust was flying around. I like it when the barrel is stamped with a logo. What a nice guy. Along the way I'll do my best to provide tips to help you turn yours into a little slice of paradise. ), Chop the barrel in half and add some cute little legs...(k, I sound a bit violent there, like, I'm taking an ax to the poor innocent wine barrel, sorry little guy!). For added wow factor, instal some LED lighting. Party and discounts online. I sanded the top and bottom too, and then I did the top of the barrel with some wire wool to make it super smooth and to make the grain of the wood stand out a bit more. If you are a wine lover, whiskey lover, barrel lover, or just love a rustic look this is the sink for you.
Participated in the Holiday Gifts Contest.
This is made by AlpineWineDesign, and they say you can message them about custom orders too.
Select what you like.
You might even use a little wood glue if you think that’ll help. We never skip steps to cut costs either. His problem solving skills and insistance that it look and work well have made this barrel look as fantastic as it does.
Completely bored?
The left door on our barrel was closing perfectly, and needed no other adjustments. Buy Now, This one hangs on the wall— nice to have that flexibility in case you want it taller or shorter. For example, for a 3/4 inch threaded hose, use a 7/8 inch drill bit and force the threads of the hose into the wood barrel. I like the extra counter space on these 2 barrel sink designs: And nothing is stopping you from painting that whiskey barrel sink another color...like this one: Here's some examples of how one of these barrel sinks can be incorporated in a. Mark out where the brackets will sit — you can use a spirit level here for accuracy. I am hoping to be the second :). Then, you could buy a water pump like one of the ones I featured yesterday— the green one comes to mind. These are great conversation starters, and will definitely be a one-of-a kind way to give your bathroom country style! It’s time to flip your sink upside down and trace for your cutout. Designed by Prestige Decanters. Use a scraper to get most of the muck off. If they do you might need to adjust the hinges. You’ll need to do this for the front cabinet door access and the back opening (for pipes). The staves will likely fall apart when you remove the door that you cut. The whiskey barrel sink above doesn’t have a handle since the owners opted to use the bung hole to pull open the cabinet door. Use your hammer and the scrap piece of wood to tap the hoop down as far as it will go. Gently separate two adjacent staves, and squeeze a line of glue down them. And why not pretend you have your own Whiskey distillery or private vineyard in France? Our decanters make, It’s migratory season for waterfowl and the Drun. Cover the top and the bottom with sticky tape so you don’t get glue everywhere. We enjoy offering our fans and previous customers unique items for their home bars and more. 5 years ago Again, this would be cool in a powder room, bar room, wine tasting room, guest bathroom, etc. I am thinking if you are handy or know someone who is, it would be relatively easy to replace the faucet.
Now, to convince my husband we NEED one of these in our powder room…..ladies, if you have a good argument to use please add it in the comments below! Visitor interested in how to make a whiskey barrel sink, wine barrel sink base, whiskey barrel sinks, oak barrel sink, whiskey barrel sink for sale, whiskey barrel sink vanity, wooden barrel bathroom sink, whiskey barrel bathroom sink, barrel sinks, half wine barrel sink. I could see this being a conversation piece in a powder room, and the awesome thing is it has doors so you can store extra hand towels, toilet paper, soap in there. Adding a copper sink completes that nice rustic look... A red sink is fun - makes you image you are seeing the red wine inside the barrel... And a glass vessel sink gives a cute nod to wine glasses... Also, if you look thru the photos at the faucet choices, you'll notice that, there's everything from brushed nickel sink faucets to modern faucets, to copper and even. Buy Now, This is why I love Etsy— look at what a creative mind at work can do. For the best experience on our site, be sure to turn on Javascript in your browser.
This sink features a Tennessee whiskey barrel which is sanded smooth and protected with 2 coats of poly, a glass sink, and Italian faucet already plumbed in with two braided water lines (whatever those are, they sound like they’re a good idea though).
It will instantly add a cool factor to the look of your bathroom, grilling patio, or cleanup area. This gets wood incredibly silky and nice looking, but it's not necessary.Glue Do the same for the other door. Thanks.
We ended up making the shelf sit just below the bung hole. And since this project centers on wood, we’ll give a nod to our custom engraved barware.